PI3DPX1205A1ZLBE

Diodes Incorporated
621-PI3DPX1205A1ZLBE
PI3DPX1205A1ZLBE

Nsx:

Mô tả:
Interface - Signal Buffers, Repeaters Active Display,W-QFN6040-40,T&R,3.5K

Tuổi thọ:
Đơn hàng đặc biệt từ nhà máy:
Nhận báo giá để kiểm tra giá hiện tại, tổng thời gian giao hàng và yêu cầu đặt hàng của nhà sản xuất.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,937

Tồn kho:
2,937 Có thể Giao hàng Ngay
Số lượng lớn hơn 2937 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.98 $2.98
$2.23 $22.30
$2.04 $51.00
$1.83 $183.00
$1.73 $432.50
$1.67 $835.00
$1.62 $1,620.00
$1.56 $3,900.00
5,000 Báo giá

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: Giao diện - Bộ đệm tín hiệu, Bộ chuyển tiếp
RoHS:  
Redrivers
I2C, USB
1 MHz
3.3 V
3.3 V
SMD/SMT
TQFN-40
Reel
Ứng dụng: Embedded Systems, Mobiles, Notebook
Nhãn hiệu: Diodes Incorporated
Tốc độ dữ liệu: 10 Gb/s
Loại đầu vào: Differential
Số lượng kênh: 1 Channel
Điện áp cấp vận hành: 3.3 V
Loại sản phẩm: Signal Buffers, Repeaters
Danh mục phụ: Interface ICs
Loại: USB Type - C
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
USHTS:
8542390090
ECCN:
EAR99

PI3DPX1205A DP-Alt Type-C Linear ReDriver™

Diodes Incorporated PI3DPX1205A Type-C Linear ReDriver™ is the DisplayPort Alt Mode (DP-Alt 1.4) 6:4 active mux linear ReDriver supporting DP Link-Training transparent for a source-side application. This device complies with the VESA DP Alt 1.4 (8.1Gbps) and USB 3.1 Gen 2 (10Gbps) industry standards. Diodes Incorporated PI3DPX1205A feature receiver equalization, flat gain, and -1dB compression output swing for each DP / USB mode. This non-blocking linear ReDriver provides 2x better additive jitter performance than the other conventional CMOS ReDrivers. Typical applications include notebooks, desktop PCs, tablets, docking, and embedded systems.

USB 3.1 ReDrivers

Diodes Incorporated USB 3.1 ReDrivers regenerate signals to boost the signal quality of high-speed interfaces. These USB 3.1 ReDrivers/Repeaters help consumer electronics interconnect to achieve a maximum transmission speed of 10Gbps with full-duplex capabilities. These ReDrivers use equalization, pre-emphasis, and other technologies to adjust and correct known channel losses at the transmitter and restore signal integrity at the receiver. This results in an eye pattern at the receiver with the margins required to deliver reliable communications with low Bit Error Rates (BER).