DS28E18Q+T

Analog Devices / Maxim Integrated
700-DS28E18Q+T
DS28E18Q+T

Nsx:

Mô tả:
Security ICs / Authentication ICs 1-Wire to I2C/SPI Bridge with Command Sequencer

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 11,538

Tồn kho:
11,538 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.70 $3.70
$2.51 $25.10
$2.32 $58.00
$2.01 $201.00
$1.89 $472.50
$1.65 $825.00
$1.37 $1,370.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.29 $3,225.00
$1.26 $6,300.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Analog Devices Inc.
Danh mục Sản phẩm: IC bảo mật / IC xác thực
RoHS:  
TDFN-CU-8
Reel
Cut Tape
MouseReel
Nhãn hiệu: Analog Devices / Maxim Integrated
Loại sản phẩm: Security ICs / Authentication ICs
Số lượng Kiện Gốc: 2500
Danh mục phụ: Security ICs / Authentication ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

DS28E18 1-Wire® to I2C/SPI Bridge

Analog Devices DS28E18 1-Wire® to I2C/SPI Bridge enables the sensor to be controlled by two wires from the host system. The DS28E18 simple communications bridge reduces the wire count from six (for SPI) or four (for I2C). The two wires use Maxim's 1-Wire protocol that combines power and signal on a single wire and is driven by the programmable I/O pins on the host's microcontroller. Analog Devices's 1-Wire protocol combines power and signal on a single wire driven by the programmable I/O pins on the host's microcontroller. The 1-Wire network supports connection lengths up to 100m and ten sensor nodes or more. The two wires from the host system implement this protocol.