BQ24179YBGR

Texas Instruments
595-BQ24179YBGR
BQ24179YBGR

Nsx:

Mô tả:
Battery Management Integrated NVDC 5- A 1-cell to 4-cell s

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 4,612

Tồn kho:
4,612 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 4612 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$6.57 $6.57
$5.04 $50.40
$4.67 $116.75
$4.25 $425.00
$4.05 $1,012.50
$3.93 $1,965.00
$3.84 $3,840.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$3.72 $11,160.00
6,000 Báo giá
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Quản lý pin
RoHS:  
Charge Management
Lithium-ion, Lithium Polymer
3 V to 18.8 V
5 A
3.6 V to 24 V
DSBGA-56
SMD/SMT
BQ24179
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Đặc điểm nổi bật: BAT Temp Thermistor Monitoring, High Accuracy, IC Thermal Regulation, Input Current Optimization, Input Current Limit, Input OVP, Integrated ADC, NVDC Power Path Management, USB C/PD Compatible
Nhiệt độ làm việc tối đa: + 85 C
Nhiệt độ làm việc tối thiểu: - 40 C
Dòng cấp nguồn vận hành: 3.3 A
Loại sản phẩm: Battery Management
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390070
ECCN:
EAR99

bq24179 Buck-Boost Battery Charger

Texas Instruments bq24179 Buck-Boost Battery Charger is a fully integrated switch-mode buck-boost charger for 1- to 4-cell Li-ion batteries and Li-polymer batteries. The integration includes four switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT), and all the loop compensation of the buck-boost converter. It uses narrow VDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. The charger supports the NVDC power path management, in which the system is regulated at a voltage slightly higher than the battery voltage but does not drop below the minimum system voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery gets into supplement mode and prevents the input source from being overloaded and the system from crashing.