VOW3120-X017T

Vishay Semiconductors
78-VOW3120-X017T
VOW3120-X017T

Nsx:

Mô tả:
Optically Isolated Gate Drivers 2.5A IGBT Mosfet

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,339

Tồn kho:
1,339 Có thể Giao hàng Ngay
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 750)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$4.24 $4.24
$3.22 $32.20
$2.96 $74.00
$2.68 $268.00
$2.54 $635.00
$2.42 $1,210.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 750)
$2.21 $1,657.50
$2.17 $9,765.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Vishay
Danh mục Sản phẩm: Bộ điều khiển cổng cách ly quang học
RoHS:  
VOW
SMD/SMT
WSMD-8
1 Channel
1.36 V
5 V
25 mA
5300 Vrms
- 40 C
+ 100 C
40 mW
100 ns
100 ns
Reel
Cut Tape
MouseReel
Nhãn hiệu: Vishay Semiconductors
Cấu hình: Non-Inverting
Điện áp đầu vào - Tối đa: 32 V
Điện áp đầu vào - Tối thiếu: 15 V
Số mạch điều khiển: 1 Driver
Số lượng đầu ra: 1 Output
Dòng cấp nguồn vận hành: 2.5 mA
Dòng đầu ra: 2.5 A
Điện áp đầu ra: 15 V to 32 V
Sản phẩm: IGBT, MOSFET Gate Drivers
Loại sản phẩm: Gate Drivers
Tắt: No Shutdown
Số lượng Kiện Gốc: 750
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 32 V
Điện áp cấp nguồn - Tối thiểu: 15 V
Công nghệ: Si
Loại: IGBT
Đơn vị Khối lượng: 1.233 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
TARIC:
8541490000
CAHTS:
8541490020
USHTS:
8541498000
JPHTS:
854149000
KRHTS:
8541409029
MXHTS:
8541400401
BRHTS:
85414900
ECCN:
EAR99

CNY Series High Isolation Voltage Optocouplers

Vishay Semiconductors CNY Series High Isolation Voltage Optocouplers are category IV high voltage isolation optocouplers available in a surface mount package. The high isolation voltage SMD version optocouplers consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic package. The single components are mounted opposite one another, providing a distance between input and output for high safety requirements of >3mm. Vishay Semiconductors CNY Series High Isolation Voltage Optocouplers are ideal for such applications as solar equipment, smart meters, and smart grids.                    

Optically Isolated MOSFET Drivers

Vishay Optically Isolated MOSFET Drivers provide the voltage required to drive the gate of a low-voltage MOSFET. The gate voltage is generated by photovoltaic cells, and no power supply is needed on the output side. This simplifies designs when using low-voltage MOSFETS. The single channel VOM1271T provides 8.4 V output voltage with an input forward current of just 10mA. The dual channel VO1263AACTR provides 14.5V output voltage.

VOW3120 Widebody 2.5A IGBT and MOSFET Driver

Vishay VOW3120 Widebody 2.5A IGBT and MOSFET Drivers consist of an infrared light-emitting diode optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control and inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate-controlled devices. The voltage and current supplied by this optocoupler make the VOW3120 ideally suited for directly driving IGBTs with ratings up to 1200V/100A. For IGBTs with higher ratings, the VOW3120 can be used to drive a discrete power stage that drives the IGBT gate. The VOW3120 provides higher isolation for applications operating at higher working voltages, and or higher pollution degree criteria. Higher VIORM, VIOTM, creepage, and clearance distances make the Vishay VOW3120 Widebody 2.5A IGBT and MOSFET Drivers ideal for many industrial control and power conversion applications.