IQS550EV02-S

Azoteq
957-IQS550EV02-S
IQS550EV02-S

Nsx:

Mô tả:
Touch Sensor Development Tools Demonstration and evaluation kit for the IQS550

Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.

Có hàng: 9

Tồn kho:
9 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
8 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$17.16 $17.16

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Azoteq
Danh mục Sản phẩm: Công cụ phát triển cảm biến cảm ứng
Hạn chế Vận chuyển
 Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.
RoHS:  
Demonstration Boards
Proximity Sensor
IQS550-B000
Bulk
Nhãn hiệu: Azoteq
Để sử dụng với: CT210/DS100
Loại giao diện: I2C
Loại sản phẩm: Touch Sensor Development Tools
Sê-ri: IQS550
Số lượng Kiện Gốc: 1
Danh mục phụ: Development Tools
Thương hiệu: ProxSense
Đơn vị Khối lượng: 100 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

                        
This evaluation kit requires CT210x configuration tool to interface with the free GUI of the IC. This is a
separately sold product.

If you have any questions please contact your Mouser Technical Sales
Representative.

5-1018-18

CNHTS:
8543709990
CAHTS:
8473302000
USHTS:
8473301180
MXHTS:
8473300401
ECCN:
3A002.h

IQS550EV02-S Trackpad Evaluation Kit

Azoteq IQS550EV02-S Trackpad Evaluation Kit is an assembled demonstration module, designed to enable evaluation of the IQS550-B000 trackpad / touchscreen controller. The evaluation board uses a 13x9 diamond sensor pattern to detect user proximity and touch. Finger position coordinates are then identified, and gesture outputs are generated. Azoteq IQS550EV02-S Trackpad Evaluation Kit incorporates a TPS65 trackpad with a mylar overlay, which provides a smooth tracking surface and outputs high-performance finger coordinates. The board can be connected to a PC using the Azoteq CT210A USB dongle programmer (not included) and the IQS5xx-B000 PC graphic user interface (GUI) software.