QN9080SIP-DK

NXP Semiconductors
771-QN9080SIP-DK
QN9080SIP-DK

Nsx:

Mô tả:
Development Boards & Kits - Wireless QN9080SIP Development Kit

Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.

Có hàng: 30

Tồn kho:
30 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
13 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$133.90 $133.90

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
NXP
Danh mục Sản phẩm: Bo mạch phát triển & Bộ công cụ - Không dây
Hạn chế Vận chuyển
 Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.
RoHS:  
QN9080
Demonstration Kits
ARM Cortex M4F
2.4 GHz to 2.4835 GHz
QN9080
Nhãn hiệu: NXP Semiconductors
Loại giao diện: UART, USB
Loại sản phẩm: Development Boards & Kits - Wireless
Số lượng Kiện Gốc: 1
Danh mục phụ: Development Tools
Mã Bí danh: 935358543598
Đơn vị Khối lượng: 500 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8543909000
USHTS:
8471500150
ECCN:
5A002.a.1

QN9080SIP-DK Wireless Development Board

NXP Semiconductors QN9080SIP-DK Wireless Development Board is enabled by QN9080SIP built on QN9080 BLUETOOTH® MCU and NT3H2211 NTAG® supporting Bluetooth 5, Generic FSK, and NFC. The QN9080SIP also integrates 32MHz and 32kHz crystals, RF matching, and a 2.4GHz antenna. This development kit contains a development board, a USB dongle, and an NFC antenna. The NXP Semiconductors QN9080SIP-DK board provides SWD/JTAG and USB interface for debugging and is form-factor compatible with the Arduino™. This USB dongle is a Bluetooth device powered by QN9080 that acts as a master or slave when communicating with the QN9080SIP development board.

QN9080DK Development Kit

NXP Semiconductors QN9080DK Development Kit is an evaluation and design platform based on the NXP QN9080 BLUETOOTH®/BLE System-on-Chip (SoC). The included QN9080DK Board integrates buttons, a Piezo buzzer, and a tri-color LED, making it easy to discern the IC status and reset the system. The Board also provides useful interfaces, such as the USB port for UART communication, the CMSIS-DAP debugger, and the standard Arduino and Pmod connector.