AS2333QS-13

Diodes Incorporated
621-AS2333QS-13
AS2333QS-13

Nsx:

Mô tả:
Operational Amplifiers - Op Amps OpAmp General Purpose SO-8 T&R 2.5K

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,588

Tồn kho:
3,588 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.35 $0.35
$0.245 $2.45
$0.218 $5.45
$0.189 $18.90
$0.166 $41.50
$0.159 $159.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.147 $367.50

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: Mạch khuếch đại thuật toán - Op Amp
RoHS:  
2 Channel
350 kHz
120 mV/us
8 uV
70 pA
5.5 V
1.8 V
90 dB
SO-8
SMD/SMT
No Shutdown
- 40 C
+ 125 C
Reel
Cut Tape
Nhãn hiệu: Diodes Incorporated
Vào - Mật độ dòng nhiễu đầu vào: 100 fA/sqrt Hz
Loại đầu vào: Rail-to-Rail
Ios - Dòng bù đầu vào: 140 pA
Loại đầu ra: Rail to Rail
Sản phẩm: Operational Amplifiers
Loại sản phẩm: Op Amps - Operational Amplifiers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Amplifier ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542339000
USHTS:
8542330001
ECCN:
EAR99

AS2333Q Zero-Drift Operational Amplifier (Op-Amp)

Diodes Incorporated AS2333Q Zero-Drift Operational Amplifier is a dual CMOS op-amp providing ultra-low input offset voltage (8μV typical) and near zero-drift over time and temperature. This technique eliminates 1/f noise and the cross-over distortion presented in most rail-to-rail input operational amplifiers. The high-precision, low quiescent current amplifier offers high-impedance inputs that have a common-mode range of 100mV beyond the rails and rail-to-rail output that swings within 50mV of the rails. Single or dual supplies as low as 1.8V (±0.9V) and up to 5.5V (±2.75V) can be used.