A4919GLPTR-5-T

Allegro MicroSystems
250-A4919GLPTR-5-T
A4919GLPTR-5-T

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 3 PHASE MOSEFT DRIVER

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 6,220

Tồn kho:
6,220 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
16 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 6220 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 4000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.05 $3.05
$2.29 $22.90
$2.10 $52.50
$1.89 $189.00
$1.79 $447.50
$1.73 $865.00
$1.67 $1,670.00
$1.63 $3,260.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 4000)
$1.48 $5,920.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Allegro MicroSystems
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Brushless DC Motor Controllers
3 Phase
150 mA
10 mA
- 40 C
+ 105 C
SMD/SMT
TSSOP-28
Reel
Cut Tape
MouseReel
Nhãn hiệu: Allegro MicroSystems
Định mức điện áp tải: 50 V
Nhạy với độ ẩm: Yes
Số lượng đầu ra: 3 Output
Điện áp đầu ra: 5 V
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: A4919
Số lượng Kiện Gốc: 4000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 50 V
Điện áp cấp nguồn - Tối thiểu: 5.5 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

Magnetic Speed Sensor ICs

Allegro MicroSystems Magnetic Speed Sensor ICs offer a comprehensive portfolio covering the full range of speed and speed with direction sensor ICs. These products include a two- and three-wire interface, a magnetic encoder (ring magnet) and gear tooth sensing, Hall and GMR technology, and ASIL-compliant options for transmission, wheel speed, engine, e-motors, and many more encoder and gear tooth sensing applications.

A4919 MOSFET Drivers with Integrated Regulators

Allegro MicroSystems A4919 MOSFET Drivers with Integrated Regulators are designed for N-Channel external power MOSFETs and offer a 5.5V to 50V voltage range. The charge pump regulator provides full <10V gate drive at power supply voltages down to 7V and allows these drivers to operate with reduced gate drive at power supply voltages down to 5.5V. The bootstrap capacitor provides the power supply voltage required for N-channel MOSFETs. Each of the six power MOSFETs in the three-phase bridge is provided one logic-level input, allowing motors to be driven with any commutation scheme defined by an external controller. Power MOSFETs are protected from cross-conduction by integrated crossover control, and short faults, supply undervoltage, and chip overtemperature conditions are indicated by a single open-drain fault output. Allegro MicroSystems A4919 MOSFET Drivers come in a 28-pin TSSOP power package (suffix LP) or a 28-terminal 5mm x 5mm QFN package (suffix ET).