IS31FL3239-QFLS4-TR

Lumissil
870-31FL3239QFLS4-TR
IS31FL3239-QFLS4-TR

Nsx:

Mô tả:
LED Lighting Driver ICs 24-Channel LED Driver, QFN-32 (4.0mm x 4.0mm), T&R

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 9,358

Tồn kho:
9,358 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
20 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$1.67 $1.67
$1.23 $12.30
$1.12 $28.00
$0.989 $98.90
$0.931 $232.75
$0.896 $448.00
$0.867 $867.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.836 $2,090.00
$0.817 $4,085.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Lumissil
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
24 Output
Boost, Buck
38 mA
5.5 V
2.7 V
1 MHz
Adjustable
- 40 C
+ 125 C
PWM Dimming, Short Circuit and Thermal Protection
Reel
Cut Tape
Nhãn hiệu: Lumissil
Điện áp đầu vào: 2.7 V to 5.5 V
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Số lượng kênh: 24 Channel
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 8 mA
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS31FL3239 24-Channel LED Driver

Lumissil IS31FL3239 24-Channel LED Driver has 24 constant current channels operating over a temperature range of -40°C to +125°C. Each channel can be Pulse-Width Modulated (PWM) by 16 bits for smooth LED brightness control. In addition, each channel has an 8-bit output current control register. This allows fine-tuning of the current for rich RGB color mixing like a pure white LED color application. The IS31FL3239 24-Channel LED driver provides a 38mA maximum output current from each channel, which can be adjusted by one 8-bit global control register. This LED driver uses proprietary programmable technology to minimize audible noise caused by MLCC decoupling capacitors. All registers can be programmed via a high-speed I2C (1MHz). The IS31FL3239 LED driver can be shut down with minimum current consumption by either pulling the SDB pin low or using the software shutdown feature. This LED driver is available in QFN-32 (4mm x 4mm) package. Typical applications include LED in-home appliances, LED displays for hand-held devices, and AI speakers and smart home devices.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.