DEM-OPA-SOT-1A

Texas Instruments
595-DEM-OPA-SOT-1A
DEM-OPA-SOT-1A

Nsx:

Mô tả:
Amplifier IC Development Tools Unpopulated PCB Comp A 595-DEM-OPA-SO-1A A 595-DEM-OPA-SO-1A

Có hàng: 3

Tồn kho:
3
Có thể Giao hàng Ngay
Đang đặt hàng:
26
Dự kiến 23/04/2026
16
Dự kiến 06/05/2026
Thời gian sản xuất của nhà máy:
12
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1   Tối đa: 5
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$6.01 $6.01

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Sẵn có:
Có hàng
Giá:
$6.01
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments DEM-OPA-SO-1A
Texas Instruments
Amplifier IC Development Tools Unpopulated PCB Comp A 595-DEM-OPA-SOT-1 A 595-DEM-OPA-SOT-1A

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Công cụ phát triển IC bộ khuếch đại
RoHS:
Demonstration Fixtures
High Speed Amplifiers
Operational Amplifier in SOT-23 package
15 V
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: US
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: US
Mô tả/chức năng: DEM-OPA-SOT-1A is a free demonstration fixture that helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers
Loại sản phẩm: Amplifier IC Development Tools
Sê-ri: DEM-OPA-SOT-1A
Số lượng Kiện Gốc: 1
Danh mục phụ: Development Tools
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8543709990
CAHTS:
8534000099
USHTS:
8534000095
JPHTS:
853400000
KRHTS:
9030820000
TARIC:
9030820000
MXHTS:
9030820100
ECCN:
EAR99

DEM-OPA-SO-1A SO-8 Generic Evaluation Module

Texas Instruments DEM-OPA-SO-1A SO-8 Generic Evaluation Modules are unpopulated printed circuit boards (PCB) for single operational amplifiers in an 8-lead SOIC (D) package. The demonstration fixture is a two-layer PCB. The Texas Instruments DEM-OPA-SO-1A uses a ground plane on the bottom and signal and power traces on the top. The ground plane has been opened up around op amp pins sensitive to capacitive loading. Power supply traces are laid out to keep current loop areas to a minimum. The SMA (or SMB) connectors may be mounted vertically or horizontally.