ISLA214P50-55210EV1Z

Renesas / Intersil
968-A214P5055210EV1Z
ISLA214P50-55210EV1Z

Nsx:

Mô tả:
Data Conversion IC Development Tools ISLA214P50 Eval 14 Bit, 500MSPS ADC

Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$302.24 $302.24

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Renesas Electronics
Danh mục Sản phẩm: Bộ công cụ phát triển IC chuyển đổi dữ liệu
Hạn chế Vận chuyển
 Sản phẩm này có thể yêu cầu chứng từ bổ sung để xuất khẩu từ Hoa Kỳ.
RoHS:  
Evaluation Boards
Data Acquisitions
ISL55210
3 V to 4.2 V
Bulk
Nhãn hiệu: Renesas / Intersil
Mô tả/chức năng: Ultra high performance broadband acquisition platform
Để sử dụng với: ISL55210
Loại giao diện: USB
Nhiệt độ làm việc tối đa: + 85 C
Nhiệt độ làm việc tối thiểu: - 40 C
Dòng cấp nguồn vận hành: 1.3 mA
Loại sản phẩm: Data Conversion IC Development Tools
Sê-ri: ISLA214P50
Số lượng Kiện Gốc: 1
Danh mục phụ: Development Tools
Đơn vị Khối lượng: 245.800 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CAHTS:
8534000019
USHTS:
8529902100
TARIC:
8534001900

ISLA112P50 / ISLA214P50 500MSPS FemtoCharge™ ADCs

Renesas / Intersil ISLA112P50 and ISLA214P50 are 12-bit and 14-bit 500MSPS analog-to-digital converters designed with Intersil's proprietary FemtoCharge™ technology on a standard CMOS process. FemtoCharge is a charge-domain signal processing technology that drastically reduces the power consumption over traditional voltage-domain design techniques. These Renesas / Intersil devices utilize two time-interleaved 250MSPS unit ADCs to achieve the ultimate sample rate of 500MSPS. A single 500MHz conversion clock is presented to the converter, and all interleave clocking is managed internally. The proprietary Renesas / Intersil Interleave Engine performs automatic correction of offset, gain, and sample time mismatches between the unit ADCs to optimize performance. An SPI port on these devices allows for extensive configurability of the ADC. The SPI also controls the interleave correction circuitry, allowing the system to issue continuous calibration commands and configure many dynamic parameters. Digital output data is presented in selectable LVDS or CMOS formats.