AMC1100DUB

Texas Instruments
595-AMC1100DUB
AMC1100DUB

Nsx:

Mô tả:
Isolation Amplifiers 4.25kV PEAK Iso Amp A 595-AMC1100DUBR A 595-AMC1100DUBR

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 4,512

Tồn kho:
4,512 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$5.50 $5.50
$4.21 $42.10
$3.68 $184.00
$3.52 $352.00
$3.35 $837.50
$3.25 $1,625.00
$3.17 $3,170.00
$3.08 $7,700.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$4.67
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments AMC1100DUBR
Texas Instruments
Isolation Amplifiers 4.25kV PEAK Iso Amp A 595-AMC1100DUB A 595-AMC1100DUB

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ khuếch đại cách ly
RoHS:  
AMC1100
1 Channel
4.25 kVrms
Galvanic
108 dB
200 uV
5.5 V
2.7 V, 4.5 V
4.4 mA, 5.4 mA
- 40 C
+ 105 C
SMD/SMT
SOP-8
Tube
Loại bộ khuếch đại: Isolation
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: AMC1100EVM
Sai số khuếch đại: 0.075 %
Nhạy với độ ẩm: Yes
Sản phẩm: Isolation Amplifiers
Loại sản phẩm: Isolation Amplifiers
Số lượng Kiện Gốc: 50
Danh mục phụ: Amplifier ICs
Đơn vị Khối lượng: 851 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542339000
CAHTS:
8542390000
USHTS:
8542330001
JPHTS:
8542330996
KRHTS:
8532331000
MXHTS:
8542330201
ECCN:
EAR99

Smart Metering Solution

Texas Instruments three-phase energy metering solution delivers the high linearity required for accurate power measurement and the isolation necessary to meet industry standards regulating power and communications for e-metering. This TI solution is composed of ADS131E08 analog front-end for power monitoring and control, AMC1100 4.25kVPEAK isolated amplifier, ISO7241C quad channel, 25Mbps digital isolator, and TMS320F2812 32-bit digital signal controller with Flash.

AMC1100 Fully-Differential Isolation Amplifier

Texas Instruments AMC1100 Fully-Differential Isolation Amplifiers are a precision isolation amplifier with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier has been certified to provide galvanic isolation of up to 4250 VPEAK, according to UL1577 and IEC60747-5-2. TI AMC1100 can be used in conjunction with isolated power supplies to prevent noise currents on a high common-mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry. The input of this isolation amplifier is optimized for direct connection to shunt resistors or other low voltage level signal sources. The excellent performance of the device enables accurate current and voltage measurement in energy-metering applications.