SEGGER Microcontroller J-Trace Pro
SEGGER Microcontroller J-Trace Pro is a superspeed trace probe designed to support the advanced tracing features of various cores and architectures. This device includes a superspeed USB 3.0 interface that enables continuous streaming trace via USB with a full trace clock. The J-Trace Pro offers multi-platform support (Windows, Linux, and macOS) and up to 4 MB/s download speed. This device features unlimited Flash breakpoints in flash memory, 150MHz maximum trace clock frequency, and Ethernet interfaces.
The J-Trace Pro captures complete instruction traces over unlimited periods with no limit set on the amount of trace data. This enables the recording of infrequent and hard-to-reproduce bugs, which is helpful when the program flow runs off the rails and halts in a faulty state. The J-Trace Pro comes with a USB 3.0 cable, Cortex-M trace reference board, 0.1″ 20‑pin ribbon cable (18cm), and 0.05″ 20‑pin debug and trace cable.
Features
- Streaming trace probe with SuperSpeed USB3.0 interface and Gigabit Ethernet
- Up to 4MB/s download speed
- Unlimited breakpoints in flash memory (Unlimited Flash Breakpoints)
- Use with Ozone and J-Flash
- Fine-tune applications with live code profiling
- Trace interface:
- ETB trace, ETM trace, live trace analysis, trace code coverage, and unlimited streaming trace
- Real-time streaming at full system clock
- Instruction-level code coverage to satisfy regulatory requirements
- Supports Arm®, RISC-V, Microchip PIC32, Renesas RX, SiLabs 8051, and Cadence Tensilica
- Full J-Link debug functionality
Kit Contents
- Box contents:
- J‑Trace Pro trace probe
- 0.05″ 20‑pin debug and trace cable
- 0.1″ 20‑pin ribbon cable (18cm)
- USB 3.0 cable
- Cortex‑M Trace Reference Board
- USB cable
- Pro software package:
- J‑Flash/J‑Flash SPI
- J‑Link unlimited Flash breakpoints
- Ozone (J-link debugger)
- Monitor mode
- J‑Link Arm® RDI/RDDI
Videos
Đã phát hành: 2025-01-14
| Đã cập nhật: 2025-01-20