NCP3284MNTXG

onsemi
863-NCP3284MNTXG
NCP3284MNTXG

Nsx:

Mô tả:
Switching Voltage Regulators 4.5V to 18V, 30A(NCP3284)/ 35A(NC3284A) Highly efficient, DC/DC Converter

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
3,000
Dự kiến 15/05/2026
Thời gian sản xuất của nhà máy:
24
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.76 $3.76
$2.84 $28.40
$2.61 $65.25
$2.36 $236.00
$2.20 $550.00
$2.13 $1,065.00
$2.07 $2,070.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$1.99 $5,970.00
$1.97 $11,820.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
onsemi
Danh mục Sản phẩm: Bộ ổn áp chuyển mạch
REACH - SVHC:
SMD/SMT
PQFN-37
Buck
4.8 V to 5.4 V
30 A
1 Output
4.5 V
18 V
3.5 mA
1 MHz
- 40 C
+ 100 C
NCP3284
Reel
Cut Tape
MouseReel
Nhãn hiệu: onsemi
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: PH
Điện áp đầu vào: 4.5 V to 18 V
Loại sản phẩm: Switching Voltage Regulators
Tắt: Shutdown
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối thiểu: 4.5 V
Đơn vị Khối lượng: 365.754 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
ECCN:
EAR99

NCP3232N High Current Synchronous Buck Converter

onsemi NCP3232N high current synchronous buck converter is designed as a high efficiency voltage-mode synchronous buck converter operating from 4.5V to 21V input and generating output voltages down to 0.6V at up to 15A. The device offers lossless low-side FET current sensing, 500KHz switching frequency, externally programmable soft-start, output over-voltage, and under-voltage protection. It also includes system over-temperature protection using a thermistor or sensor through OTS pin, hiccup mode operation for all faults, pre-bias start-up, adjustable output voltage, Power Good indicator, and internal over-temperature protection. The onsemi NCP3232N high current synchronous buck converter is ideal for cellular base stations, telecom & network equipment, and server & storage systems.

NCP3284 Single-Phase Voltage Regulators

onsemi NCP3284 Single-Phase Voltage Regulators integrate power MOSFETs to provide a high-efficiency, compact-footprint power management solution. The device integrates a DC/DC controller with two highly efficient MOSFETs into a signal thermally enhanced 5mm x 6mm QFN package. The NCP3284 Regulators utilize a patented enhanced ramp pulse modulation control architecture that delivers ultra-fast load transients that enable the reduction of external capacitors and/or provide better transient tolerances.