NBA3N200SDR2G

onsemi
863-NBA3N200SDR2G
NBA3N200SDR2G

Nsx:

Mô tả:
Clock Drivers & Distribution MLVDS DRIVER RECEIVE

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,643

Tồn kho:
1,643 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
22 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.63 $2.63
$2.23 $22.30
$2.12 $53.00
$1.95 $195.00
$1.80 $450.00
$1.68 $840.00
$1.66 $1,660.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.65 $4,125.00
$1.57 $7,850.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$4.38
Tối thiểu:
1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
onsemi
Danh mục Sản phẩm: Mạch dẫn động đồng hồ & Phân phối
RoHS:  
SOIC-8
NBA3N200S
AEC-Q100
Reel
Cut Tape
MouseReel
Nhãn hiệu: onsemi
Loại sản phẩm: Clock Drivers & Distribution
Số lượng Kiện Gốc: 2500
Danh mục phụ: Clock & Timer ICs
Đơn vị Khối lượng: 72 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399901
ECCN:
EAR99

NBA3N M-LVDS Driver Receivers

onsemi NBA3N M-LVDS Driver Receivers are 3.3V supply differential Multipoint Low Voltage (M−LVDS) that offer Type-1 (0.0V) or Type-2 (0.1V) receiver thresholds. NBA3N M-LVDS Driver Receivers support Simplex or Half Duplex bus configurations. The NBA3N201S and NBA3N200S have Type-1 receivers that detect the bus state with as little as 50mV of the differential input voltage over a common−mode voltage range of -1V to 3.4V. The onsemi NBA3N206S has Type-2 receivers that detect the bus state with as little as 50mV of the differential input voltage over a common-mode voltage range of -1V to 3.4V. Type-1 receivers have near-zero thresholds (±50mV) and exhibit 25mV of differential input voltage hysteresis to prevent output oscillations with slowly changing signals or loss of input. Type-2 receivers include an offset threshold to provide a detectable voltage under open-circuit, idle-bus, and other faults conditions.